(“Start this connection automatically” is what it sounds like, if the network is available your machine will connect to it automatically. Go to the “ Network and Sharing Center” (there’s a link near the bottom of the Wi-Fi setting page, not shown), click on “ Set Up a Connection or Network“, and then click on “ Manually connect to a wireless network”.įill in the information about your wireless network, including its name and the network password. The downside here is that Windows won’t automatically detect your network you’ll have to configure it manually fortunately you should only need to do this once. Unfortunately, exactly how this is done depends on your specific access point. So there’s one additional change that, while not adding a lot of real security, would at least confirm your neighbor’s bad intentions, if compromised.Ĭonfigure your access point to stop broadcasting the SSID (aka network name), and then change the SSID. It would be easy for you to connect to the wrong one, for example, without thinking. I also suspect your neighbor can continue to cause trouble by renaming his access point the same as yours to simply confuse either your computer or yourself when it comes time to connect to your wireless network. My assumption is that a known network is known by at least two characteristics:īy this, I mean I’m assuming that two networks with the same name are still considered different networks if they use different encryption, or one uses none at all. At worst, you’ll be prompted when a network is recognized as available, and of course you can then say “No” and choose a different access point you trust. Once removed, you won’t connect automatically. Scan through this list, click on any you don’t want to connect to automatically, and click on Forget to remove them from the list.Īssuming your neighbor’s access point is listed, you can remove it. This is a list of wireless access points you’ve connected to in the past, which will be remembered and connected to automatically in the future. In the resulting Settings app, click on Manage known networks. Again, it sounds like you may already have done this.Ĭlick on the wireless network icon in your taskbar, and then on Network settings. The next step I would take would be to make sure you connect only to your preferred connections. This should make it impossible for anyone without your specific wireless password to connect to your network. Once again, exactly how you set this will vary based on your specific device. Step 2 is to make sure your wireless access point has WPA2 enabled, with a good password. Exactly how you do that will vary, depending on what brand/model of access point or router you happen to be using, but it typically requires going into the administrative interface for the device and changing the SSID, or network name. Step 1 is to rename your wireless access point. While I wouldn’t call it “blocking” the neighbor’s wireless network, here are the steps I would take. Exactly what is difficult to say, but I think you’re wise to be very cautious. On the surface, it certainly feels like your neighbor is up to something.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |